The one-stop-shop for all your street furniture requirements

Standard Height Barrier - Fixed product image

Standard Height Barrier - Fixed

BA1.HR6

Part of our Strong & Simple range.

Our standard height barrier is fabricated using 75mm x 75mm box section for the upright posts and 100 x 50mm rectangular steel for the cross beam.

Our height barriers are perfect for deterring unwanted visitors to private areas. The strong, steel cross beam will not allow vehicles over a certain height: hence the name.

Maximum height allowance 2.1 metre. Root fix design for concreting in.

Knocking bar available at extra cost.

Please note: We would always advise root fixing your height barrier at least half of the above ground height. Therefore a 2.1m height barrier should be concreted into the ground with a 1m root depth.

Select your required size below:

The specification for your selected product is shown in the table below:
Attribute Value
Barrier Colour

Barrier Colour

Select your required barrier colour. Our barriers can be powder coated in any colour, so if you require a specific colour which isn't listed then please contact us with the details.
The colour shown has been matched as closely as possible and does not serve as a standard for RAL colour products as it depends on your monitor. Use offical RAL colour product chart for reference.
Galvanised

Galvanised

Select whether your barrier is galvanised (to prevent rust)
Knocking bar

Knocking bar

Select whether you want to add an optional knocking bar. This will act as a warning to vehicles before they hit the barrier itself.

Barricade Ltd

Unit 6 Conway Industrial Estate,
Skull House Lane, Appley Bridge, Wigan, Lancashire. WN6 9DW

E: info@barricade.co.uk
T: 01257 367 090
F: 01257 367 610